How to Install Ring Doorbell on Narrow Surface

Ring doorbells are the modern way of keeping an eye on what is happening right in front of your door through motion detection, push notification, and live to stream. Some people connect it to their regular doorbells, and that shortcut is also helpful. 

Technically, a ring doorbell is not at all challenging to be installed as it can be simplified into three steps: mounting, hooking, and screwing. But what is difficult is to estimate the right place and angle for the doorbell to capture a fuller view of the standing person. It can get even more complicated if the surface is narrow, thick, or in the very corner. 

A beginner may face a lot of confusion while tackling the problem of how to install a ring doorbell on a narrow surface.

The wrong placement will block the excellent view and deny the purpose of putting on a Ring Doorbell in the first place.

Here’s How to Install Ring Doorbell on Narrow Surface: Detailed Guide

The following are the possible methods or solutions that can help you land on the precise installation of your ring doorbell on a narrow or thin surface.

Decide the area for installation.

First, you have to decide quickly on the exact area where you want to install the ring doorbell. It can either be the door frame or the side wall.

If you are confused over this point: go through these pointers.

  • If the door frame is too narrow, you can consider the installation on the wall instead.
  • If the wall is too thick or the door is quite an inset, the ring bell will potentially not do the job there; consider back the door.

However, another thing that can be done to install the Ring Doorbell is to install it directly on the door, given that the doorbell should be battery-operated and not wired. It will work if the side wall is not unnecessarily thick on the outside.

Otherwise, it will block the camera capture, and you will be unable to prevent the kids from ringing your bell for fun and the package lifters.


To aid the narrow door frames and inset walls, the experts have designed a special kind of Ring Doorbell Pro 1 and Pro 2 that will cover this issue.

Note: If we have such users on board that face neither of the two issues as mentioned above, the Ring Doorbells 1 and 2 are designed for you. Buy and install. Enjoy tight security around your home.

Choose the fitting kit for your model of Ring Doorbell.

The two most commonly used kits to support the installation of a Ring Doorbell are the Corner kit and the Wedge kit. A wrong viewing angle can be fixed with the help of such a kit.

If your video capture is not prominent because of the interference of the wall or if it is only capturing the body minus the face, then utilizing a kit is a must thing.

It works by tilting the doorbell to several degrees from 15 to 50, so the camera can focus more on the approaching visitors than on the nearby houses.

Though usually, the installation kit is already a part of the Ring Doorbell box that is included free of cost. But depending upon your installation type, you can also purchase the equipment separately.

How to Install Battery-Operated Ring Doorbell

Such a type of ring doorbell can be installed almost everywhere but majorly on the door itself. This is how to DIY a ring doorbell installation.

  • Step 1: Charge the battery of the doorbell with the provided charging cable in the box. Wait until the battery light turns green.
  • Step 2: Adjust the doorbell perfectly in the center of your door with a maximum distance of about 4 feet from the ground.

Note: Considering the length of your door, you can adjust the doorbell anywhere between 40 to 50 feet.

  • Step 3: Level up your doorbell using the level tool, and then highlight the four corners using a marker.
  • Step 4: Make the mounting holes on those pointed corners using the drill tip and screws.
  • Step 5: Finally, screw the doorbell on the door and later adjust the faceplate on top of it. It is done!

The same procedure goes for mounting a battery-operated Ring Doorbell on a concrete wall, with the only difference between using the anchors and screws afterward. 

Solution 2: Use a Peephole Cam

If you are living on rent and do not want to invest full-time on a Ring doorbell or your homeowner does not allow you to drill it away, the only option is to use a Ring Peephole Cam.

This is an intelligent way to get things done, but the function will be similar to the regular Ring Doorbell. All you have to do is extract your door’s peephole and replace it with this tiny camera.

Practically, it will be adjusted inside and not outside of your house. It will cover all the aspects from HD video to two-way communication.

How to do it: Use strong double-sided tape to firmly attach it to the place.

Ring Doorbells 1 and 2 VS Ring Doorbells Pro 1 and Pro 2

There are Ring Doorbells 1 and 2, and then there are Ring Doorbells Pro 1 and 2. These are different versions of the same doorbell for relatively other surfaces. The width of the Ring Doorbells 1 and 2 is 2.4” and 2.5” inches, respectively. So if your door frame is larger than that, you should drop the consideration of these two versions.

In another case, the Ring Doorbells Pro 1 and Pro 2 keep a small width and can be easily used on a narrow surface. The Pro versions are sleek in style and offer more good video quality but are set up using the hardwiring option.

In simple words:

  • Ring Doorbell 1, 2, 3, and 4 are battery operated and therefore bulkier in structure. This does not make them suitable for narrow surfaces.
  • Ring Doorbell Pro 1 and Pro 2 are smaller in structure but are not battery-operated. These can be employed only via hand-wiring. At best, you can connect these to your existing doorbell. 

Some Careful Tips While Mounting the Ring Doorbell

  • Do not make a blind pick for the installation kit. Choose it according to the type or model of your Ring Doorbell.
  • The best direction to install the Ring Doorbell is on the right side as it provides a broader viewing angle. With the ideal installation kit, you can double the performance.
  • To ensure the straight mounting on any surface, make use of a level tool and draw the pointers before drilling.
  • Keep using the stackable mounts to tilt the angle until you are satisfied with the view.
  • Before screwing it up, double-check the video capturing in case you need to remove or add a wedge, do it right then.
  • If possible, buy a mounting kit separately because the in-package kit does not always come with complete accessories.

Can I mount the Ring Doorbell horizontally?

This is a frequently asked question, although it does not make much sense. You can mount the Ring doorbell horizontally if you want to, but it is not a good strategy. This is not how a Ring doorbell works.

With the horizontal adjustment, you will not be able to comprehend the view appropriately. Instead of tilting your phone to view the captured video, you should mount the doorbell vertically.


After the installation, connect your Ring Doorbell with your Wifi to receive swift notifications about any slightly possible motion around your door. You can also install the app and take the subscription to save the streaming for 24 hours a month. Enjoy the security!

Read More: How to Change Ring Doorbell Sound Outside | Can You Use A Blink Camera Without A Subscription? | Is Ring Protect Plan Worth It? | Best Video Doorbells Without Subscription |

Is Your Ring Doorbell Flashing Blue Or White? Here’s What It Means | Can You Change Ring Doorbell Tone Outside? | How Long Does Ring Doorbell Battery Last

Leave a Comment